VME & VXI Systems
Analogue I/O | Digital I/O | Controllers, DSPs & mainframes | Transient recorders | Counters and pulse generators | Termination assemblies |
VXI offers you numerous benefits. Some of these are:
It is an open standard with extensive multivendor support. There are over 1200 commercial VXI products available from a wide variety of manufacturers. |
|
Its modular approach allows you to configure systems with off-the-shelf building blocks that meet your specific needs. |
|
It provides for fully shielded modular instruments, rugged chassis, EMI (electromagnetic interference) protection and tight power supply noise specifications. |
|
It creates an excellent electrical environment, even for low-level, high-accuracy, analog conversion circuitry. |
|
It uses the 32-bit VME bus for primary backplane communication. |
|
It supports geographic addressing, allowing the host software to interrogate the various modules and perform automatic system configuration. Even though this feature is not mandatory, all of our modules support geographic addressing. |
|
It includes a variety of features-such as a Local Bus for intermodule communication, a precision clock for timing and trigger lines for event handling-to facilitate high-performance systems. |
|
It is easy to configure, use and support because of the specifications that have been generated by the VXIplug&play Systems Alliance. |
V100-Series Memory, controllers, DSPs & mainframes
V110 4 to 128 Mbyte Memory |
||
V120 FOXI VXI Slot-0 Controller |
||
V122 FOXI PCI Host Adapter |
||
V150 Embedded 680x0 Real-time Slot-0 Controller |
||
V151 Embedded PowerPC Real-time Slot-0 Controller |
||
V160 Grand Interconnect Slot-0 Controller |
||
V165 Digital Signal Processor |
||
V192 5-slot, C-Size, VXIbus Mainframe | ||
V193 6-slot, C-Size, VXIbus Mainframe | ||
V194 13-slot, C-Size, DC-powered, VXIbus Mainframe | ||
V195 13-slot, C-Size, AC-powered VXIbus Mainframe |
V200-Series Analog I/O & signal conditioners
V200 - 16/32-channel, 16-bit, 200,000 Sample/s/channel Sigma-Delta ADC | ||
V207 - 16-bit, 500,000 Sample/second ADC Subsystem | ||
V208 - 16-bit, 100,000 Sample/second ADC Subsystem | ||
V213 - 32/64-channel,16-bit ADC with DAC and TTL Options | ||
V215 - 32-channel, 16-bit ADC | ||
V216 - 16-channel, 24-bit Sigma-Delta ADC | ||
V241 - 24 to 96-channel, High-level Multiplexer | ||
V243 - 16 to 96-channel, Low-level Multiplexer | ||
V246 - 8-channel Bridge Signal Conditioner | ||
V252 - 16-channel 8-pole Analog Filter | ||
V253 - 16-channel Programmable Gain/Filter | ||
V258 - Resolver- or Synchro-to-Digital Converter | ||
V266 - 32/64-channel, 16-bit D/A Converter | ||
V270 - 6-channel, 16-bit D/A Converter | ||
V275- 8-channel, 12-bit D/A Converter | ||
V285 - 8/16-channel, 500 kHz DAC/Waveform Generator | ||
V210 - 8/16-channel, 12-bit ADC with Filter | ||
V211 - 8/16-channel, 12-bit ADC | ||
V265 - 8/16-channel, 16-bit DAC | ||
V280 - 6-channel, 12-bit, Timed DAC |
V300-Series Digital input & output
V305 24-channel Isolated Digital Input |
||
V345 24-channel Isolated Digital Output |
||
V385 16-channel Digital Input/Output |
||
V387 128-channel Discrete Input/Output |
||
V310 48-channel Digital Input |
||
V350 48-channel Digital Output |
||
V355 16-channel High-rating Relay Output |
V400-Series Transient recorders
V408 16-bit, 16-channel Transient Recorder |
||
V440 1, 2 or 4-channel, 60 MHz Transient Recorder |
||
V490 Trigger Pulse Generator |
||
V404 1- to 4-channel Transient Recorder |
||
V410 12-bit Transient Recorder w/ 32 Ksample Memory |
||
V420 12-bit Transient Recorder w/ 1 to 4 Msample Memory |
||
V425 8-channel, 12-bit Transient Recorder Output |
V500-Series Special functions
V500 CAMAC-to-VXIbus Adapter |
||
V505 4-channel Communications Interface |
||
V525 VXIbus Prototyping Module |
||
V530 Pressure Scanner Interface |
||
V580 Relay Multiplexer |
||
V581 Calibration Relay |
||
V510 ARINC-429 Interface |
||
V515 MIL-STD-1553B Bus Monitor | ||
V520 Time Code Interface | ||
V522 2-channel Serial Data Interface | ||
V540 3-channel Digital-to-Synchro Converter |
V600-Series Counters and pulse output modules
V605 6-channel 10 MHz Optically Isolated Counter |
||
V610 6-channel 50 MHz Counter |
||
V620 4-channel Up/Down Presettable Counter |
||
V625 6-channel Time Interval Counter |
||
V635* 8-channel 100 kHz Frequency Counter |
||
V645 8-channel Timing Pulse Generator |
||
V660 Programmable Clock Generator |
||
V615 6-channel 100 MHz Counter | ||
V630 4-channel 50 kHz Frequency Counter |
V700-Series Termination assemblies and panels
V710 Signal Conditioning Termination Panel |
||
V750-V754 Front-panel Termination Assemblies |
||
V765 Rack-mount Termination Panel |
||
V768 BNC Rack-mount Termination Panel |
||
V792 Rack-mount, Isothermal Termination Panel |
SCxx-Series Modules for the V710 termination panel
SC10 +5 V Power Supply |
||
SC11 +/-15 V Power Supply |
||
SC15 Serial Controller |
||
SC16 Cable Interface for the V200 |
||
SC17 Cable Interface for the V213 |
||
SC20 Wideband Bridge Signal Conditioner |
||
SC21 Bridge Signal Conditioner with Gain and Filtering |
||
SC25 Direct-input Module |
Home | Suppliers | About Scensys | Y2K statement | E-mail us |